⏳🔥LIMITED-TIME 50% OFF! ⏰Anti-Mold Waterproof Caulk Sealant – Mold-Resistant, Waterproof Sealing for Bathrooms & Kitchens🏠
⏳🔥LIMITED-TIME 50% OFF! ⏰Anti-Mold Waterproof Caulk Sealant – Mold-Resistant, Waterproof Sealing for Bathrooms & Kitchens🏠
Couldn't load pickup availability
Tired of Grubby Sealant? Give Those Gaps a Fresh Finish.
Those dark marks around the shower, worn-looking sink edges and tired bathroom joints can make even a clean room look a bit neglected. This anti-mould waterproof sealant is designed to help refresh suitable joints and create a neat, moisture-resistant finish without turning a small DIY job into a major project.
Small Touch-Ups That Make a Big Difference
🔍
Designed for Mould-Prone Areas
Bathrooms and kitchens deal with moisture every single day, especially around showers, basins and tiled edges. The anti-mould formula is designed to help resist mould growth on the cured sealant, keeping suitable joints looking cleaner for longer when properly applied and maintained.
🔍
Made for Everyday Home Maintenance
A simple way to tackle worn-looking sealant around common household wet areas. The formula is described as low-odour, making it a practical option for smaller indoor sealing projects when used according to the product instructions. Always ventilate the room during application.
🔍
Waterproof Sealing Where It Matters
Suitable for creating a moisture-resistant seal around appropriate household joints, including sinks, bathtubs and kitchen splashback edges. Once correctly applied and fully cured, the sealant helps reduce water passing through the sealed gap.
🔍
A Straightforward DIY Application
No complicated preparation or specialist installation process. Clean the surface, prepare the nozzle and apply a steady bead along the joint. Smooth the sealant using a suitable scraper to create a tidy finish.
Refresh Those Everyday Problem Areas
✨ A Cleaner-Looking Finish Without a Big Renovation
You don't need to replace an entire bathroom fitting just because the sealant around it looks tired. Removing failed sealant and applying a fresh bead can make suitable joints look noticeably neater while helping to seal against everyday splashes.
Four Simple Steps to a Neater Seal
Remove any loose or failed old sealant, then clean and thoroughly dry the area. Apply masking tape along both sides of the joint for neat edges.
Open the container, remove the protective seal and attach the supplied nozzle as directed.
Squeeze a steady bead of sealant along the prepared joint, keeping the application as even as possible.
Use a suitable scraper to smooth the bead. Remove masking tape carefully and keep the area dry for at least 24 hours, following the product instructions.
Specifications & What's Included
Product Specifications
- Product Type: Anti-Mould Waterproof Caulk / Sealant
- Net Content: 120ml
- Available Colours: White, Clear, Black
- Stated Shelf Life: 12 Months
- Application: Bathroom and kitchen sealing
- Stated Cure Time: 24 Hours before water exposure
Available Colours
- White – For a classic clean-looking finish
- Clear – For a more discreet seal
- Black – For darker joints and finishes
What's Included?
1 × 120ml Anti-Mould Waterproof Sealant
Application & Care Notes
- Remove failed or loose existing sealant before applying a new bead.
- Ensure the application surface is clean and completely dry.
- Use only on compatible surfaces and follow the manufacturer's directions.
- Allow at least 24 hours for curing before exposing the sealant to water.
- Maintain adequate ventilation during application and curing.
- Store according to the packaging instructions.
An anti-mould sealant can help resist mould growth on the treated sealant surface, but it does not eliminate existing mould or resolve underlying damp and ventilation problems. Any existing mould should be dealt with appropriately before resealing.
Keep the product away from children and pets during application and curing. Avoid contact with skin and eyes. Follow the label's safety instructions.
Colour may vary slightly due to lighting and screen settings. Curing performance may depend on temperature, humidity and application thickness.
